100 yard 5-shot challenge / database

[BrandonMF]

I'll add one. Was out shooting my CMP Special .308 Garand with a buddy a few weeks ago and got a pretty good group. Had to make a few adjustments but I finally got it hitting about where I wanted it to. 100 yards, 149gr American Eagle .308.

Shot with this...

 

[Jestik]

Remington 700 SPS-Tactical AAC-SD
Bell & Carlson M40 Tactical Stock
SWFA "Super Sniper" 12x42mm Scope
Weaver Tactical Extended Multi-Slot Picatinny Base w/ 20 MOA
Weaver Tactical 6 Hole Pictainny 30mm Rings

This was the last group I shot of the day, so it was not a "cold bore"

By my calculations, the group measures about .075", or 3/4 MOA. The diameter of a dime is .70"

 

[7stw]

Very nice guys !

 

[Pulp]

I decided to go ahead and post these, even though both are pretty terrible. Rifle is a Remington 660, .243 Winchester. Top target was shot with Winchester 100 grain factory load. Cold bore, no warmup shots. While barrel was cooling I reloaded the 5 empties with 38 grains of Varget under a Sierra 85 grain HPBT with my Lee Loader. It is a 5 shot group, but one of the shots was over the paper. Obviously there is some scope adjusting way overdue. I'm really having trouble with my neck. When I lean down into the stock for sight picture and cheek weld, my neck starts shaking. The gun is capable of much better groups than these, but apparently I'm not anymore. I've shot 3 shot groups with this gun that were around 3/4 inch. But when your head starts bouncing it's tough to hold a sight picture.





Maybe a visit or two to a chiropractor might help my neck. Hopefully in the future I can show some better targets to y'all. I've been following this thread for quite a while now and figgered it was time to post something, even if it is ugly.

 

[Hump66]

Playing with the new SPR. Zeroed with XM193, switched to match ammo without adjusting zero. Shooting standing, supported over the hood of the truck on bipod.

The rig:
BCM SPR upper on BCM lower with Vltor A5 RE, Geissele SSA-E
Bushnell 10x44 mil/mil scope
AAC SPR-M4 silencer
[Broken External Image]

The loads:
Factory Winchester .223 69gr SMK HPBT
9 shots since one FTF
[Broken External Image]

Factory Hornady .223 75gr BTHP
10 shots
[Broken External Image]

I can't wait to work up loads for this thing. It's going to be a tack driver.

 

[ASP785]

Hump, were those groups shot suppressed?

 

[Hump66]

Hump, were those groups shot suppressed?

Yes they were.

 

[Jedabug92]

Playing with the new SPR. Zeroed with XM193, switched to match ammo without adjusting zero. Shooting standing, supported over the hood of the truck on bipod.

The rig:
BCM SPR upper on BCM lower with Vltor A5 RE, Geissele SSA-E
Bushnell 10x44 mil/mil scope
AAC SPR-M4 silencer
[Broken External Image]

The loads:
Factory Winchester .223 69gr SMK HPBT
9 shots since one FTF
[Broken External Image]

Factory Hornady .223 75gr BTHP
10 shots
[Broken External Image]

I can't wait to work up loads for this thing. It's going to be a tack driver.

looks good, what program do yall use to show the square and grouping average??

 

[Hump66]

looks good, what program do yall use to show the square and grouping average??

It's called OnTarget

http://www.ontargetshooting.com/download1.html

 

[Jedabug92]

5 American Eagle 168 match @100yds