Ok so I finally broke down... Time to build an AR (M4gery). I know firearms, but am just a Novice when it comes to the AR platform. I, however, do know what I want from this rifle...
SHTF Scenario:
- 16" barrel
- MUST BE RELIABLE AS ALL HELL
- Accuracy is a must obviously , :p
- I would like a red dot-'esque', or other quick acquisition scope with a magnifier for increased range but still quick target acquisition, lower 1/3 co-witnessed to fixed front iron sight. ( I want a rear iron sight, I would like it fixed as well but am slightly confused on how to go about this)
- Warranty would be nice , but not neccessary if reliability is already top notch (be hard to get the usefulness of a warranty if the dollar collapses)
- Must have M4 feed ramps and extension
- Mid length system ( they have the least problems for this barrel length I assume?)
- Obviously all Mil-spec, Chrome lined, all the standard+ goodies
... I think that is it for now
I already have a Spikes stripped Lower & DTI LPK kit in hand...
I have been looking at gas piston uppers as compared to DI .. I am leaning towards the gas piston.. Saw some Adams Arms uppers at Cold Hands Arms ( love that place now) and was curious about them. Any input from this brand?
Also looked at Stag Arms, DTI, LMT, etc...
Biggest issue is I want the ability to use my 'red dot' type scope , use it to around 2-300 yards. and if that scope ever goes down, I would like to be able to instantly switch to my fixed sights without worrying about taking off the other optics. I would also like these optics mounted in a low enough horizontal plane as to not screw or create a large exaggeration with my ballistics from scope to rifle. Am I missing anything? LOL
I should have around ~$400 to play with on the 25th of this month.... and around ~$860 to play with on the 8th of next month.
I am open and welcome to absolutely all input!
Anyone have anything interesting to suggest?
-Will
SHTF Scenario:
- 16" barrel
- MUST BE RELIABLE AS ALL HELL
- Accuracy is a must obviously , :p
- I would like a red dot-'esque', or other quick acquisition scope with a magnifier for increased range but still quick target acquisition, lower 1/3 co-witnessed to fixed front iron sight. ( I want a rear iron sight, I would like it fixed as well but am slightly confused on how to go about this)
- Warranty would be nice , but not neccessary if reliability is already top notch (be hard to get the usefulness of a warranty if the dollar collapses)
- Must have M4 feed ramps and extension
- Mid length system ( they have the least problems for this barrel length I assume?)
- Obviously all Mil-spec, Chrome lined, all the standard+ goodies
... I think that is it for now
I already have a Spikes stripped Lower & DTI LPK kit in hand...
I have been looking at gas piston uppers as compared to DI .. I am leaning towards the gas piston.. Saw some Adams Arms uppers at Cold Hands Arms ( love that place now) and was curious about them. Any input from this brand?
Also looked at Stag Arms, DTI, LMT, etc...
Biggest issue is I want the ability to use my 'red dot' type scope , use it to around 2-300 yards. and if that scope ever goes down, I would like to be able to instantly switch to my fixed sights without worrying about taking off the other optics. I would also like these optics mounted in a low enough horizontal plane as to not screw or create a large exaggeration with my ballistics from scope to rifle. Am I missing anything? LOL
I should have around ~$400 to play with on the 25th of this month.... and around ~$860 to play with on the 8th of next month.
I am open and welcome to absolutely all input!
Anyone have anything interesting to suggest?
-Will
Last edited: