PSA has a bunch of full kits in at the moment. This should be everything you need to get started.
https://palmettostatearmory.com/ar-15/rifle-kits.html
I have a standard collapsible stock and maybe a pistol grip laying around that I can give you for free. I think they were takeoffs from my M&P sport.
A helpful tip for installing roll pins is after getting them started, use channel locks or vise grips with the jaws taped up to press the roll pin in.
It keeps you from needing to whack on them so much with a hammer, which I hate doing.
I have roll pin punches! Pressing the roll pins in is so much easier.You really need roll pin punches! plus tape side of lower behind pin
I used the PSA lower parts kit with the boron coated trigger. After very little polishing with the rope trick it scales at 4lbs on the trigger.
I went with the 6.5 Grendel which is based on the 7.62x39 cartridge. Went 10 for 10 on the 6inch target at 300 yards and supposedly it will do 1000 yards easily. One of these days I will stretch it out to 600.
Yep, cabelas will have the CMMG oops kits for $12 I think, always pick one up when they are in stock.I would also suggest investing in an “oops” kit or three...
Enter your email address to join: